Build Your DTF Gang Sheet
This is for regular DTF only. NOT for UV DTF.
With our Gang Sheet Builder you don't need to have fancy programs to mash your images onto a page. Just pick the size you want to build, upload and rearrange your images and save your design. Come back here, paste your design link, select the size and checkout. You can do this over and over for as many gang sheets as you need!
All gang sheets are 22" wide. You pick the length and load them up!
All submitted graphics must be print quality. Minimum 300dpi. PNG & PDF formats accepted. PNG is preferred! Lower quality graphics do not print well. NO screenshots.
DTF Transfers can be heat pressed onto any cotton/polyester blend, nylon, treated leather, polyester, cotton, 50/50 blends, light and dark fabricsm, non-treated cotton, silk, denim, & more.
All our DTF transfers are printed in house on our commercial printers. We only use ink that is safe for newborns through adults. All transfers are printed with non-toxic, environmentally friendly inks.
How to Apply
DTF Instructions
1. Pre-press if you need to remove wrinkles.
2. Press at 300° for 10 seconds. Heavy pressure.
3. Peel instantly!
4. Cover with teflon, spare shirt or parchment and press for 5 seconds.
Ensure no seams get in the press as it can cause a loss of pressure and the transfer may not adhere properly.
UV DTF Instructions
1. Wipe item with alcohol. Let dry.
2. Peel carrier from backing.
3. Apply decal to item.
4. Rub decal firmly (aka burnish).
5. Peel off carrier carefully. Press any lifting design again with extra firm pressure.
Care Instructions