Sleeve Custom DTF Transfers
Needing to order sleeve designs along with your custom transfers? This is the listing for you! This is just for the sleeve design, you must order the front design separately.
Available sizes:
- 3" Wide x 12" long (max length)
- 4" Wide x 15" long(max length)
We will size to the width you request and then allow the length to be determined by your graphic. So if you have 2 sleeves, one with 3 hearts and names and one with 5 hearts and names, and you pick 3" wide, we will size them to 3" wide. The 5 hearts will be longer than the 3 hearts. But if the 5 hearts go over 12" long we will resize so they are only 12" long and they will be narrower than 3".
All submitted graphics must be print quality. Minimum 300dpi. PNG & PDF formats accepted. PNG is preferred! Lower quality graphics do not print well. NO screenshots.
DTF Transfers can be heat pressed onto any cotton/polyester blend, nylon, treated leather, polyester, cotton, 50/50 blends, light and dark fabricsm, non-treated cotton, silk, denim, & more.
All our DTF transfers are printed in house on our commercial printers. We only use ink that is safe for newborns through adults. All transfers are printed with non-toxic, environmentally friendly inks.
Application Instructions
DTF Instructions
1. Pre-press if you need to remove wrinkles.
2. Press at 300° for 10 seconds. Heavy pressure.
3. Peel instantly!
4. Cover with teflon, spare shirt or parchment and press for 5 seconds.
Ensure no seams get in the press as it can cause a loss of pressure and the transfer may not adhere properly.
UV DTF Instructions
1. Wipe item with alcohol. Let dry.
2. Peel carrier from backing.
3. Apply decal to item.
4. Rub decal firmly (aka burnish).
5. Peel off carrier carefully. Press any lifting design again with extra firm pressure.
Care Instructions